Jiangsu, China
Business Type:
Trading Company
Year of Establishment:
2017-12-01
Plant Area:
300 square meters
Management System Certification:
ISO 9001, ISO 14000
Average Lead Time:
Peak season lead time: one month
Off season lead time: within 15 workdays
OEM/ODM Service
Sample Available

Solar Controller, Solar Charge Controller, Solar Charger Controller manufacturer / supplier in China, offering Dhs-Jh Intelligent Wireless Charge Controller, 2V 100mA Waterproof Solar Save Ground Light, Gsi Series Single Phase DC to AC Inverter and so on.

Gold Member Since 2018

Dhs-Jh Intelligent Wireless Charge Controller

Get Latest Price
Min. Order / Reference FOB Price
5 Pieces US $7-8/ Piece
Port: Shanghai, China
Production Capacity: 5000/Week
Payment Terms: L/C, T/T, D/P, Western Union, Paypal, Money Gram
Condition: New
Certification: CE
Application: Collector Controller, Solar System Controller, Charger Controller, Lighting Controller, Solar Working Station, Voltage Controller
Rated Voltage: 12V-45V
Transport Package: Carton
Trademark: SHINEXEN

You Might Also Like

Loading...

Basic Info

Model NO.
DHS-JH
Origin
Made in China

Dhs-Jh Intelligent Wireless Charge Controller
Main features

1. The new Solar Charge Controller remote control design, the wireless control distance can be up to 10 meters, and the controller parameters can be modified by remote control;
2. Data communication adopts multiple handshake protocol and Run Length Encoding to make data transmission accurate and fast;
3. The wireless reading controller runs parameters to facilitate the quick maintenance and operation of the system;
4. Support 12V24V lead acid battery, 3 series of lithium battery, 4 series of LifePO4 battery, customizable parameters;
5. Enable the activating function of lithium battery protection, and can open the load at any time by manual remote control;
The maximum efficiency of the constant current source is 96%.
7. Intelligent 5 segment dimming light, power adjustment more accurate, color temperature performance more outstanding;
8. The battery is equipped with low voltage protection, intelligent power output, and effective protection of lighting time;
Excellent current ripple control and load linearity control, minimizing LED light failure and lengthening LED life.
10. Improved charging algorithm, charging more efficiency, making solar energy use time longer;
11. 12V battery suitable for 3 series lamp beads ,24v battery suitable for 6 series lamp beads;
12. Low temperature charging protection of lithium, when the ambient temperature is below zero, it can be set to stop low temperature charging and effectively protect the battery;
13. Enhanced battery anti-grafting protection, LED short-circuit protection, open road protection, etc., to make the system fully and effectively protected;
Not only support external temperature compensation, internal PCB has the temperature protection and recovery function;
15. Organic thermal conductivity silicone seal, IP68 waterproofing grade, can be used in all kinds of bad environment, industrial grade quality guarantee;
16. The high power density design of the metal shell gives the maximum power to the unit volume, while it can effectively control the temperature rise;
17. Support external photocontrol trigger (need to add modules), support human infrared or microwave induction (additional modules are required).


Technical parameters
Accumulator voltageColloid, open batteryTernary lithium batteryLithium iron phosphate battery
12V/24V3.7V*3S3.2V*4S
Rated charging current10A
Rated power12V->max40W  /×2/24V ->max80W
The output currentParameters can be modified, by default: 150mA
open circuit voltage< 55V
Overcharge protection voltage14.5V/29.0V12.5V14.4V
Overcharge recovery voltage14.0V/28.0V12.3V14.2V
Charge voltage13.8V/27.6V12.2V14.2V
Floating charging voltage 13.2V/26.4V12.0V14.0V
Overshoot protection voltage 11.0V/22.0V9.6V10.4V
Overrelease voltage12.5V/25.0V11.1V12.8V
Low voltage protection voltage12.0V/24.0V11.1V12.8V
Light control turn on lamp voltage 5.0V/10.0V5.0V5.0V
Light control lamp voltage 7.0V/14.0V7.0V7.0V
Manual switchParameters can be modified, default: off, light control mode
Intelligent reduced powerParameters can be modified, default: yes
Sub-zero chargeParameters can be modified, default: yes
No-load loss≤10mA
Number of lights in series12V->3 /2 / 24V -> 6 (customizable)
Working temperature-35ºC--+65ºC;
Protection gradeIP68
The net weight0.25Kg
Diameter and length1.5mm²,≤100mm
Size (length x width x height)68×84×21mm


Installation and wiring
1. First, the LED lamp head is connected with the negative pole to correspond to the lamp red black line;
2. In the same time, the battery is connected to the controller with the battery red and black line, and the controller has three instructions to enter the work.
3. Wait 60 seconds for the lamp to be bright, and then the solar panel is connected with the negative pole to the red black line of the panel.
4, if the day is installed, wait 60 second turn off the light to enter charge status, if the evening installation will continue to light the lamp, the installation is finished;
Remove the controller and install the reverse order.
The installation diagram is as follows:
Dhs-Jh Intelligent Wireless Charge Controller




State indication
LED indicator


 
Light colorIndicates The content statusFunction
Yellow DischargeNormally bright Output normal
Quick flashLoad short circuit protection
Slow flash  Load opening protection
Red Battery powerAlways brightBattery is normal
Quick flashOver-discharge protection
Green  ChargingSlow flash Charging
Quick flashInput overpressure, no charge
Always brightVoltage is higher than the turn-off voltage, no charge
OffThe voltage is lower than the turn-on voltage
Note: 1. The load short circuit opens to the protection, and after 2 minutes, the detection failure exists. If there is any further protection, the load will be turned on.

Load requirements
System voltageThe number of light beads in seriesLoad output power
12VS=3PLED ≤40W
24VS=6PLED ≤ 80W
Note: 1. 3 series 3.7 V lithium battery corresponding to the voltage load requirement of 12V system;
2. 4 series 3.2 V iron phosphate battery corresponding to the voltage load requirement of 12V system;



Load working mode
The load working time can be divided into five periods, each working time and work power can be adjusted arbitrarily. Different combinations can achieve different control modes.
Adjustment itemparametersRecognition Valuethe output current of the factory will be 150mA, and the power adjustment step will be 10%, and the time will be adjusted to 10min.
The first power  0 ~ 100% rated power100% rated power
The first paragraph0~999min120min
Phase 2 power0 ~ 100% rated power 50% rated power
The second period0~999min240min
Section 3 power0 ~ 100% rated power0
The third period0~999min0
Section 4 power0 ~ 100% rated power0
The fourth period 0~999min0
Phase 5 power0 ~ 100% rated power0
Period 50~999min0
1. Routine optical control timing mode: for example, the lights are black and light for 4 hours, the first 2 hours full power, and the second half power.
Setting: the first power is "100% rated power", the first period is "120min"; The second part is "50% rated power" and "120min" in the second period; The rest of the power time is "0".
2. Electric timing + morning light pattern: cases required day black lights 4 hours, 2 hours before the full power, power, in about two and a half hours after the morning 2 hours before dawn full power lights, the whole night about 10 hours;
Setting: the first power is "100% rated power", the first period is "120min"; The second part is "50% rated power" and "120min" in the second period; The third power is "0" and the third period is "240min". The fourth part is "100% rated power" and the fourth period is "120min". The rest of the power time is "0".
3. Delay electric timing + morning light pattern: example to delay for 30 minutes, dark and light 4 hours, 2 hours before the full power, power, in about two and a half hours after the morning 2 hours before dawn full power lights, the whole night about 10 hours;
Setting: the first power is "0", the first period is "30min"; The second part is "100% rated power" and the second period is "120min". The third part is "50% rated power" and the third period is "120min". The fourth part is "0" and the fourth period is "210min". The fifth stage power is "100% rated power" and the fifth time is "120min".

Note: this controller has a battery low voltage intelligent power function, when the battery voltage is less than the controller setting "low voltage protection value" to step down power output 10%, until to 10% power, the end of the light or battery discharge protection.


Matters needing attention
1. It is strictly forbidden that the output voltage of the controller can be caused by excessive output voltage when the output voltage is too high.
2. The controller has set relevant parameters, and the LED lamp is connected to ensure that the parameters are aligned with the controller, otherwise the controller will be damaged or the LED lamp will be burned.

Dhs-Jh Intelligent Wireless Charge Controller

 



 

Send your message to this supplier

*From:
*To:
avatar Mr. Welson
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now