Basic Info.
Application
Collector Controller, Solar System Controller, Charger Controller, Lighting Controller, Solar Working Station, Voltage Controller
Product Description
Main features
1. The new Solar Charge Controller remote control design, the wireless control distance can be up to 10 meters, and the controller parameters can be modified by remote control;
2. Data communication adopts multiple handshake protocol and Run Length Encoding to make data transmission accurate and fast;
3. The wireless reading controller runs parameters to facilitate the quick maintenance and operation of the system;
4. Support 12V24V lead acid battery, 3 series of lithium battery, 4 series of LifePO4 battery, customizable parameters;
5. Enable the activating function of lithium battery protection, and can open the load at any time by manual remote control;
The maximum efficiency of the constant current source is 96%.
7. Intelligent 5 segment dimming light, power adjustment more accurate, color temperature performance more outstanding;
8. The battery is equipped with low voltage protection, intelligent power output, and effective protection of lighting time;
Excellent current ripple control and load linearity control, minimizing LED light failure and lengthening LED life.
10. Improved charging algorithm, charging more efficiency, making solar energy use time longer;
11. The maximum output voltage of the load can be up to 50V, which can drive up to 15 LED lights in series, with maximum power of 80W;
12. Low temperature charging protection of lithium, when the ambient temperature is below zero, it can be set to stop low temperature charging and effectively protect the battery;
13. Enhanced battery anti-grafting protection, LED short-circuit protection, open road protection, etc., to make the system fully and effectively protected;
Not only support external temperature compensation, internal PCB has the temperature protection and recovery function;
15. Organic thermal conductivity silicone seal, IP68 waterproofing grade, can be used in all kinds of bad environment, industrial grade quality guarantee;
16. The high power density design of the metal shell gives the maximum power to the unit volume, while it can effectively control the temperature rise;
17. Support external photocontrol trigger (need to add modules), support human infrared or microwave induction (additional modules are required).
Technical parameters| Accumulator voltage | Colloid, open battery | Ternary lithium battery | Lithium iron phosphate battery |
| 12V/24V | 3.7V*3S | 3.2V*4S |
| Rated charging current | 10A |
| Rated power | 12V->max40W /×2/24V ->max80W |
| Output voltage | 16~60V |
| open circuit voltage | < 55V |
| Overcharge protection voltage | 14.5V/29.0V | 12.5V | 14.4V |
| Overcharge recovery voltage | 14.0V/28.0V | 12.3V | 14.2V |
| Charge voltage | 13.8V/27.6V | 12.2V | 14.2V |
| Floating charging voltage | 13.2V/26.4V | 12.0V | 14.0V |
| Overshoot protection voltage | 11.0V/22.0V | 9.6V | 10.4V |
| Overrelease voltage | 12.5V/25.0V | 11.1V | 12.8V |
| Low voltage protection voltage | 12.0V/24.0V | 11.1V | 12.8V |
| Light control turn on lamp voltage | 5.0V/10.0V | 5.0V | 5.0V |
| Light control lamp voltage | 7.0V/14.0V | 7.0V | 7.0V |
| Manual switch | Parameters can be modified, default: off, light control mode |
| Intelligent reduced power | Parameters can be modified, default: yes |
| Sub-zero charge | Parameters can be modified, default: yes |
| No-load loss | ≤10mA |
| Number of lights in series | 12V-> 5 ~ 15/2 / 24V -> 10 ~ 15 (customizable) |
| Working temperature | -35ºC--+65ºC; |
| Protection grade | IP68 |
| The net weight | 0.25Kg |
| Diameter and length | 1.5mm²,≤100mm |
| Size (length x width x height) | 68×84×21mm |
| Accumulator voltage | Colloid, open battery | Ternary lithium battery | Lithium iron phosphate battery |
| 12V/24V | 3.7V*3S | 3.2V*4S |
| Rated charging current | 10A |
| Rated power | 12V->max40W /×2/24V ->max80W |
| Output voltage | 16~60V |
| open circuit voltage | < 55V |
| Overcharge protection voltage | 14.5V/29.0V | 12.5V | 14.4V |
| Overcharge recovery voltage | 14.0V/28.0V | 12.3V | 14.2V |
| Charge voltage | 13.8V/27.6V | 12.2V | 14.2V |
| Floating charging voltage | 13.2V/26.4V | 12.0V | 14.0V |
| Overshoot protection voltage | 11.0V/22.0V | 9.6V | 10.4V |
| Overrelease voltage | 12.5V/25.0V | 11.1V | 12.8V |
| Low voltage protection voltage | 12.0V/24.0V | 11.1V | 12.8V |
| Light control turn on lamp voltage | 5.0V/10.0V | 5.0V | 5.0V |
| Light control lamp voltage | 7.0V/14.0V | 7.0V | 7.0V |
| Manual switch | Parameters can be modified, default: off, light control mode |
| Intelligent reduced power | Parameters can be modified, default: yes |
| Sub-zero charge | Parameters can be modified, default: yes |
| No-load loss | ≤10mA |
| Number of lights in series | 12V-> 5 ~ 15/2 / 24V -> 10 ~ 15 (customizable) |
| Working temperature | -35ºC--+65ºC; |
| Protection grade | IP68 |
| The net weight | 0.25Kg |
| Diameter and length | 1.5mm²,≤100mm |
| Size (length x width x height) | 68×84×21mm |
| System voltage | The number of light beads in series | Load output voltage Vout | Load output power |
| 12V | 15≥S ≥ 5 | Vout ≥ 16V | PLED ≤40W |
| 24V | 15≥S ≥ 10 | Vout ≥ 32V | PLED ≤ 80W |
2. 4 series 3.2 V iron phosphate battery corresponding to the voltage load requirement of 12V system;
Load working mode
The load working time can be divided into five periods, each working time and work power can be adjusted arbitrarily. Different combinations can achieve different control modes.| Adjustment item | parameters | Recognition Value | the output current of the factory will be 150mA, and the power adjustment step will be 10%, and the time will be adjusted to 10min. |
| The first power | 0 ~ 100% rated power | 100% rated power |
| The first paragraph | 0~999min | 120min |
| Phase 2 power | 0 ~ 100% rated power | 50% rated power |
| The second period | 0~999min | 240min |
| Section 3 power | 0 ~ 100% rated power | 0 |
| The third period | 0~999min | 0 |
| Section 4 power | 0 ~ 100% rated power | 0 |
| The fourth period | 0~999min | 0 |
| Phase 5 power | 0 ~ 100% rated power | 0 |
| Period 5 | 0~999min | 0 |
Setting: the first power is "100% rated power", the first period is "120min"; The second part is "50% rated power" and "120min" in the second period; The rest of the power time is "0".
2. Electric timing + morning light pattern: cases required day black lights 4 hours, 2 hours before the full power, power, in about two and a half hours after the morning 2 hours before dawn full power lights, the whole night about 10 hours;
Setting: the first power is "100% rated power", the first period is "120min"; The second part is "50% rated power" and "120min" in the second period; The third power is "0" and the third period is "240min". The fourth part is "100% rated power" and the fourth period is "120min". The rest of the power time is "0".
3. Delay electric timing + morning light pattern: example to delay for 30 minutes, dark and light 4 hours, 2 hours before the full power, power, in about two and a half hours after the morning 2 hours before dawn full power lights, the whole night about 10 hours;
Setting: the first power is "0", the first period is "30min"; The second part is "100% rated power" and the second period is "120min". The third part is "50% rated power" and the third period is "120min". The fourth part is "0" and the fourth period is "210min". The fifth stage power is "100% rated power" and the fifth time is "120min".
Note: this controller has a battery low voltage intelligent power function, when the battery voltage is less than the controller setting "low voltage protection value" to step down power output 10%, until to 10% power, the end of the light or battery discharge protectionMatters needing attention1. It is strictly forbidden that the output voltage of the controller can be caused by excessive output voltage when the output voltage is too high.
2. The controller has set relevant parameters, and the LED lamp is connected to ensure that the parameters are aligned with the controller, otherwise the controller will be damaged or the LED lamp will be burned. FAQ
Q1. What's Certificates you have?
A: CE, RoHS, ISO9001, SGS certificates
Q2. How many years warranty?
A: All of products warranty 2 years. If have any quality problem, could return to us exchange new one or repair IR free. Use our company DHL account, free freight.
Q3. What's the payment term?
A: 100% T/T (large order, accept 30% T/T prepay 70% balance before shipping), Western Union, Paypal.
Q4. How's the delivery time?
A: Usually 2 hours after receive full payment. OEM order need 10-15 days.
Q8. How to distinguish solar charge controller with MPPT function?
A: Input voltage more than output voltage, charging current less than loading current.
Q12. What about your sale service?
A: Developing long-lasting relationships with our customers is of utmost importance to us. We are committed to providing you with excellent all-round services, before, during and after the installation of your renewable energy system. Why Choose Us?1>Strict Quality Control
For each order, strict inspections will be put in place for each procedure during their processing. The negative products will be ironed out before shipping
2>Stable suppliers
We have cooperated with many accessory suppliers for many years, so we can get cheaper and high quality accessories and thus we can give you a low price and high quality products.
3>Smooth Shipping
We have partnership with excellent shipping forwarders, therefore we can promise fast delivery and have the goods well protected.
4>Customers from all over the world
We have enough experience about foreign trade and our clients can be found in many countries
5>Fast reply
We will respond your question with 8 hours!
Address:
Jingde West Road, Qianhuang Town, Wujin District, Changzhou, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Electrical & Electronics, Industrial Equipment & Components, Lights & Lighting, Metallurgy, Mineral & Energy
Management System Certification:
ISO 9001, ISO 14000
Company Introduction:
Shinexen is a professional manufacturer and supplier of products and services in the field of electronics. Now, Shinexen is one of the leading manufacturers of solar products and wind energy products in China. Headquartered at 73#, Jingde west road, Hongqi town, Wujin District, Changzhou, Jiangsu, P. R. China, Shinexen is of convenient traffic and is only 150 km away from Shanghai. With over 700 square meter cleaning room for multiple production lines, Shinexen has tremendous capacity and offers both ODM and branded business for a variety of international companies. Thanks for our brilliant R&D team, we have obtained 35 patents for our new technologies and products.
Our products include: Solar lights; Solar controllers, such as MPPT solar charge controller, PWM solar charge controller, and other high-power and low-power controller; Centralized inverter; String inverter; Multi-string inverter; Component inverter; Wind turbines; Off-grid power generation system; Grid-connected power generation system etc...Shinexen power supply is widely used in street lighting, domestic power generation, large solar power system and wind and solar power generation system, etc.
Shinexen has ISO9001: 2008 and ISO14001: 2004 certificates, and our sophisticated technical team has developed economical assembly techniques to satisfy demanding requirements of our major customers. Shinexen boasts the world-leading production equipment and a powerful R&D team, providing rock-solid protection for our product quality. We are creating profits for our customers with tremendous work capacity and outstanding innovation competence in customization.
